Engine Warranty & Maintenance Policy - Boosted Engineering

Engines must be serviced at the following intervals:
- 1,000km (initial oil inspection and service)
- 7,000km
- 15,000km
Servicing must be carried out by a qualified mechanic or workshop
Full service records and invoices must be retained and provided upon request

Engine oil level must be checked regularly and maintained at the correct level at all times
Operation of the engine with insufficient oil level may result in severe damage and is not covered under warranty

Initial Oil Inspection Requirement (1,000km):

An oil change and inspection must be completed at 1,000km after first start
This must be carried out by Boosted Engineering, or by a reputable oil analysis provider (such as Penrite or equivalent)
Documentation of this inspection must be retained

Failure to complete required servicing at the specified intervals may result in denial of warranty claims

Important:
Oil requirements may vary depending on engine build, tolerances, and intended use

Customers are required to confirm the correct oil specification with Boosted Engineering for their specific engine

Use of incorrect oil (including lower viscosity oils such as 0W-20 unless explicitly approved) may result in:
- Reduced oil pressure
- Premature wear
- Engine failure

Failures resulting from incorrect oil selection are not covered under warranty

Cooling system must be maintained in proper working condition
Coolant must be at correct levels and free from contamination
Engines must not be operated while overheating
Any instance of engine overheating must be addressed immediately and the vehicle must not be driven until the issue is resolved

Engines must be installed by a qualified professional
All supporting systems must be in proper working condition, including:
- Fuel system
- Cooling system
- Intake and exhaust systems
All supporting components must be compatible and in proper working condition
Failures caused by faulty, incompatible, or poorly performing supporting components are not covered under warranty

Standard (non-forged) engines must remain on a factory or Boosted Engineering supplied tune only
Aftermarket tuning or modifications are not permitted unless explicitly approved in writing by Boosted Engineering
Any unauthorised tuning or ECU modification will result in denial of warranty claims

Forged and high-performance engine builds may be tuned and modified
Tuning must be carried out by a Boosted Engineering approved tuner
All servicing intervals and maintenance requirements outlined in this policy must still be followed
These engines may require more frequent inspection and maintenance due to increased performance demands
Failures resulting from unsafe tuning, poor calibration, or use outside intended limits are not covered under warranty

Standard (non-forged) engines are intended for normal road use only
These engines must not be used for race track driving, competition use, or sustained high-performance driving
Damage caused by:
- Abuse
- Over-revving
- Detonation
- Track use
- Sustained high load or aggressive driving
  is not covered under warranty

No disassembly is to be carried out without prior approval from Boosted Engineering
In the event of an issue:
- Customer must contact Boosted Engineering first
- We will advise on the correct inspection and diagnostic process
Boosted Engineering reserves the right to request:
- ECU data logs
- Diagnostic reports
- Photos or videos
  to assist in assessing warranty claims
Third-party assessments may be considered but are not binding

Failure to follow this process may affect warranty eligibility

Warranty does not cover costs associated with:
- Transport
- Removal
- Reinstallation
These costs remain the responsibility of the customer unless otherwise agreed in writing

Warranty period is 12 months or 15,000km (whichever comes first)
Warranty commencement date is defined as:
- The date of installation where the engine is installed by Boosted Engineering, or
- The date the engine is dispatched from our workshop where installation is carried out externally
Once either the time or kilometre limit is reached, warranty eligibility ceases
Warranty is only valid where all servicing requirements and intervals have been met and documented
Warranty applies to manufacturing or assembly defects only
All claims are assessed based on:
- Service history
- Oil specification used
- Installation and usage conditions

High-performance race engines (including but not limited to 1000hp engine packages) are not subject to standard warranty terms
These engines are designed for extreme use and require frequent inspection, maintenance, and rebuild intervals
Warranty or support for these products is provided on a case-by-case basis only

Boosted Engineering engines are high-performance products and require proper maintenance and operation

Rebuilt engines may utilise a combination of new and reconditioned components, and may not exhibit identical characteristics to brand new engines

Failure to follow this policy may result in denial of warranty claims

If you are unsure about any aspect of your engine’s maintenance or setup, please contact Boosted Engineering prior to use